Temporary fencing hire

Temporary fencing hire_Wire Mesh Factory丨SS Wire Mesh丨Conveyor Belt丨Nail丨Fiberglass Mesh

After the temporary fencing hire, galvanizing integrally formed web and hot dipping (or spraying) treatment, weight 270g coating / m2, thickness 0.8mm dip ~ 1.2mm, dark green color selection sprays. Coating should have a consistent, consistent color, smooth surface, no streamer drops, foam powder, iron leakage.

Network precision manufacturing: Length error ≤2.5mm, height error ≤3.0mm.

Network planarity requirements: convex or concave value ≤5.0mm.

Diameter before cold drawn steel wire galvanized error ≤0.06mm. Welded grating defects ≤3.0mm.

If mesh web is welded, web welding position should be strictly controlled in the design position, which is the position error ≤1.5mm.

 

Temporary fencing hire, resistance welding, such as by soldering, welding, must be correct, so that a minimum deformation. After the welding slag is to be cleaned. Welding is generated is to leveling process. To ensure that the net itself has a sufficient strength, the strength of the web should be greater than 1 kN weld seams, weld seams of less than 4%.

http://www.alexwiremesh.com
http://www.alexwiremesh.com/temporary-fencing.html

http://www.alexwiremesh.com/a/news/temporary-fencing/2017/0531/3550.html

Temporary yard fence

Temporary yard fence_Wire Mesh Factory丨SS Wire Mesh丨Conveyor Belt丨Nail丨Fiberglass Mesh

1. Temporary yard fence not fixed at the time of installation stability, without screws or fastenings attached time

2. Loose external environment, such as a strong external impact force, the impact of the typhoon, or they are basically man-made damage. This essentially results from three main loose zinc steel guardrail, then we have a zinc steel fence on the first thing to fix loose to watch, which is part of the guardrail. Then, based on the external characteristics of zinc to steel fence is determined that the cause of the relaxation. And then repair it. It is to discover where the problem lies and bind for the cause.

3. due to changes in the environment outside the loose zinc steel guardrail, such as a solid upright position loose, do not loosen with the corrosion of stainless steel screws, which caused by corrosion.

http://www.alexwiremesh.com
http://www.alexwiremesh.com/temporary-fencing.html

http://www.alexwiremesh.com/a/news/temporary-fencing/2017/0529/3542.html

ALEX WIRE MESH PRODUCTS NEWS

NEWS_Wire Mesh Factory丨SS Wire Mesh丨Conveyor Belt丨Nail丨Fiberglass Mesh



ALEX WIRE MESH PRODUCTS NEWS

http://www.alexwiremesh.com/a/news.html

ALEX WIRE MESH CO., LIMITED

Alex Zhu (Manager)

Skype: alex150288

Wechat: 68090199

QQ: 68090199

Phone: +86-150-2881-7323

Whatsapp: +86-150-2881-7323

Email: manager@alexwiremesh.com

Website: http://www.alexwiremesh.com

Facebook: https://www.facebook.com/AlexWireMeshCoLtd

Youtube: https://www.youtube.com/c/Alexwiremeshcoltd

Twitter: https://twitter.com/alexwiremesh

Linkedin: https://twitter.com/alexwiremesh

Pinterest: https://www.pinterest.com/AlexWireMesh

Dryer wire belt

Dryer wire belt_Wire Mesh Factory丨SS Wire Mesh丨Conveyor Belt丨Nail丨Fiberglass Mesh

Dryer wire belt

Brand: Alex

Material: 304

Hole type: diamond type

Mesh Width: 20 (mm)

Mesh Length: 30 (mm)

Uses: Dryer

Origin: Anping

Scope of application: industry

 

How to improve the service life of dryer wire belt?

In recent years, with the continuous development of industrial chain plate has also been very good use, and taking advantage of not only the development of innovative trends. But to a product to maintain good performance, and can be long-term use, must be regularly maintained and maintained, following Xiaobian to look at specific measures.

 

In the use of dryer wire belt process to pay attention to the details, such as before the shutdown, in addition to special circumstances, the stainless steel chain plate should be all the material unloading. Multi-machine transfer transfer, boot sequence for the first to open the last conveyor (unloading stainless steel chain plate), and then move forward in order, and finally open the material conveyor. Second, the chain plate in the use of the tension should not be too large, should be in the transmission gear is not skidding and the material point is not over the premise of relaxation, to ensure that the minimum initial tension in the work; in the same machine may not be different types , Different specifications of the link board used together. In summary, the correct operation and regular maintenance can improve the service life of the chain plate.

http://www.alexwiremesh.com
http://www.alexwiremesh.com/conveyor-belt.html

http://www.alexwiremesh.com/a/news/conveyor-belt/2017/0429/3454.html